Buying Parts: Motorcycle Maintenance

Every rider hopes that their bike will run without issue. However, there will be some times where something might wear out or break and you’ll have to do some maintenance. However, buying parts can be a bit tricky. That’s why it’s important to know some general guidelines to follow when doing some parts shopping…

Buying Parts: What You Should Know

Manufacturer vs. aftermarket

The first thing to consider when buying parts is if you’d want a manufacturer part versus an aftermarket part. However, many people don’t fully know what the differences between these two types of parts are. Manufacturer parts are parts that come straight from the bike manufacturer. These parts will fit your bike exact, but can be a bit more pricey. 

Aftermarket parts are parts sold by other companies. These parts can fit your bike, and others as well. These parts also tend to be cheaper, but this comes with some of them not being as well put together or tested as their manufacturer counterparts. Ultimately, it’s a good idea to do some digging to figure out which part type is best for your needs.

Replacements vs. upgrades

Another common mistake people make when buying parts is getting confused between replacement parts and upgrades. Replacement parts will ensure that your bike acts the same as it did before. After all, the designers intended for these parts to fully replace a broken part only. However, things get trickier with upgrades.

Upgrade parts will change how a certain part of your bike handles. This could include your bike’s speed, traction, exhaust, and many more. Many popular aftermarket parts tend to be upgrades. Remember to keep that in mind when looking for parts, so you get the right kind of part for your needs.

Shop smart

It’s important to be a smart shopper when you’re buying parts. You’ll want to make sure you buy your parts from reputable dealers or sellers. Buying from other riders can be cheaper, but those parts could be used, or have other issues which you may not know about. You also wouldn’t be able to return those parts should you run into a problem.

Also, don’t just buy the first part you see. Do some looking around, and ask others for their opinions. A good idea is to check the reviews for a part before you buy. That way, you’ll see if there are any serious problems that you should know about. 

Motorcycle Maintenance for Safety | Motorcycle Accident Attorneys

Finally, it’s spring, and the weather is warming up again. So now is the time for some basic motorcycle maintenance to be safe on the road. Here we explain the basics.

motorcycle maintenanceMotorcycle Maintenance for Safety

While riders know they need regular maintenance, sometimes they just want to ride now. However, it is important to first check over your motorcycle. Then you can ride safely with confidence. So start with a full visual check of your motorcycle from front to rear. In addition to making sure all bolts are secure, also look at brake pads, belts, and hoses for issues. Also change all fluids, including oil, brake fluid, and chain lube. When in doubt, replace parts sooner than later. Rather, don’t wait to save money. In fact, you can save money in the long run by avoiding unnecessary and expensive repairs. Moreover, the last place you want to discover a problem is while riding down the highway.

Tires and Brakes

Because everything starts and finishes with your tires, make sure they are ready to go. After all, they are the only thing between you and the road. So absolutely make sure they are in good shape with no “flat” or worn spots. In addition, keep your bike and tires slightly off the ground during storage months. Also be sure the tires are properly inflated. While too much pressure can cause tire failure, too little can cause handling and steering problems. And when you need new tires, don’t get the cheap ones. Rather, spend the few extra dollars to protect yourself and get back home to your family.

Just like good tires, don’t take chances with your brakes. Seems like everyone wants speed when they should really focus on how quickly a motorcycle can stop. While going fast is fun, being able to stop in time will save your life. So regularly check your brake linings, cables, and fluids and know you can stop when necessary. Since this is so important, you probably should do a check every time you get ready to ride. Rather than risk serious injury, put safety and regular motorcycle maintenance first. And finally, ride like your life depends on it.